SICK Inspector PIM60 series

CommentBinaryRangeAttributeValue tagContainer tag
figured value in the Ethernet
Result output dialog.
Only applicable for Feature type
Single edge. The chosen edge's
USINT[3, 4]POLARITY
polarity in the search direction:
3 = dark to bright, 4 = bright to
dark
a
This tag must be used inside the <POLYGON> container
b
Only available for Ethernet Raw.
c
For EtherNet/IP the position is represented as an INT value. Use the scale attribute to get more decimals
d
This tag must be used inside the <BLOB> container. The value are given for each Blob ROI (not for each found
blob)
e
This tag concerns the whole tool, i.e. not specific to the feature/edge chosen by the index
f
Red arrow points out the midpoint for the Edge count tool
g
The angle of the edge relative to the region.
h
The INTERNAL_ANGLE is the angle of a feature, i.e. the relation of the two edges of the feature.
Note
When a tool is related to the object locator and the object locator is not found in the live image
the presented results for the related tools are undefined.
8015726/ZPP7/2018-
09
©SICK AG • Identification & Measuring • www.sick.com • All rights reserved
Subject to change without notice
48
Reference Manual
Result output formatting
Appendix
Inspector PIM