A.3.1 General tags
Table A.2 Generic output string tags
CommentBinaryRangeAttrib-
ute
Value tag
UINTMESSAGE_SIZE • Binary format: The size of the message
in bytes
• ASCII format: The number of characters
in the message
Analyzed image's number (Resets at
power-up or device reset)
UDINTIMAGE_NUMBER
0=Not located, 1=Detail failed, 2=All
passed 3=Not located and detail failed
a
USINT[0, 3]IMAGE_DECISION
Reference object index
b
USINT[0, 31]REF_OBJECT
Used to send single control charactersIGNORED[0, 255]valueASCII
Same
as
<ASCII
value="32"/>
IGNOR
ED
SP
A
CE
Same
as
<ASCII
value="9"/>
IGNORED
T
AB
Left angular bracket, "<". Useful when
generating XML-formatted output.
IGNOREDLAB
Right angular bracket, ">". Useful when
generating XML-formatted output.
IGNOREDRAB
Same
as
<ASCII
value="10"/>
IGNOR
ED
NEWLINE
Same
as
<ASCII
value="13"/>
IGNOR
ED
RETURN
Current time since device boot. Restarts
from zero after ~10 years (using seconds)
and ~49 days (using milliseconds)
UDINT{s, ms}timeUnitTIME
Device serial code.UDINTSERIALCODE
Only valid while the device is in Edit mode.
This is the focus value from the Image
settings tab
REAL[0, 100]FOCUS
A counter that increments for each tele-
gram sent over the result channel. Resets
at power-up or device reset.
UINTTELE-
GRAM_COUNTER
If the intValue attribute is not specified
the default value will be zero and the tag
can be used for padding.
USINT[0, 255]intValueUSINT
If the intValue attribute is not specified
the default value will be zero and the tag
can be used for padding.
UINT[0, 65535]intValueUINT
If the intValue attribute is not specified
the default value will be zero and the tag
can be used for padding.
UDINT[0, 2
32
-1]intValueUDINT
Value can be changed through the com-
mand channel.
UINT[0, 65535]intValueUINT1
Value can be changed through the com-
mand channel.
UINT[0, 65535]UINT2
49
©SICK AG • Identification & Measuring • www.sick.com • All rights reserved
Subject to change without notice
8015726/ZPP7/2018-
09
Appendix
Result output formatting
Reference Manual
Inspector PIM
To Next Page
Loading...
