SICK Lector63 Flex C-mount Series User Manual

Table 2: Scope of delivery
No. of
units
Component Comment
1 Type of device ordered (com‐
plete device or basic device)
Complete device:
All required components have already been assem‐
bled at the factory (camera housing and optics
accessories). The optics protection hood is provided
with a device seal.
Basic device:
Camera housing and individual components for
independent assembly. The light inlet is fitted with a
round protective cap in the basic version.
All devices:
The M12 and M8 electrical connections are sealed
with a tightly-fastened protective cap.
Without holders and connecting cables.
2 Sliding nut, 5.5 mm deep, with
M5 threaded fixing hole
Alternative mounting option for the device instead
of tapped blind hole. Use in pairs.
1 Hexagon key a/f 2
•
S-mount lens: for manual actuation of the focus
screw.
•
For opening and closing the cover on the top of
the device (access to the microSD card slot and
the focus screw).
2 Blue label (round, self-adhesive) Protects the focus setting when using an S-mount
lens. Adjustment is performed with the focus
adjustment screw. After adjustment of the focus,
the label can be stuck over the access opening for
the screw on the top of the device.
One label serves as a spare part.
1 SICK lens cloth Is used for cleaning optical surfaces, e.g. the front
screen in the optics protection hood.
1 Printed safety notes, multilin‐
gual
Brief information and general safety notes.
1)
Order individual components separately as accessories. Depending on order, e.g. lens, integratable illu‐
mination unit VI55I, internal spacers, optics protection hood, etc.
Associated components not contained in the delivery:
Table 3: Other components
Component Comment
SOPAS ET configuration software Available online at:
•
www.sick.com/SOPAS_ET
This documentation, available in English,
German and French, and in other lan‐
guages if necessary
Available online at:
•
www.sick.com/Lector63x
NOTE
An overview of available complete devices and a detailed selection guide for the match‐
ing device components for the basic devices is provided on the online product page at:
•
www.sick.com/Lector63x
Accessories
Accessories such as brackets and connecting cables is only delivered if the accessories
have been ordered separately, see "Accessories", page 71.
3 PRODUCT DESCRIPTION
16
O P E R A T I N G I N S T R U C T I O N S | Lector63x Flex C-mount and S-mount 8018071/16XD/2020-05-06 | SICK
Subject to change without notice

SICK Lector63 Flex C-mount Series Specifications

General

Brand	SICK
Model	Lector63 Flex C-mount Series
Category	Barcode Reader
Language	English