Need help?Do you have a question about the SICK IDM series and is the answer not in the manual?
General| Enclosure rating | IP65 |
|---|---|
| Light source | LED |
| Interfaces | RS-232, USB, Ethernet |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
Instructions for connecting scanners via USB, RS-232, and industrial fieldbuses.
Detailed specifications for corded and Bluetooth IDM scanners, including enclosure, codes, and operating parameters.
Steps for battery installation, charging, and initial setup of Bluetooth scanners.
Guide on how to charge the scanner's battery using the provided cradles.
Correct methods for inserting the scanner into smart or charging cradles for proper connection.
Information on utilizing USB bus power for scanner operation and charging.
Explanation of LED and beeper indicators for scanner status and events.
How to use the paging function to locate paired smart cradles or scanners.
Overview of different radio link modes (PAIR, PICO, SPP, HID) for Bluetooth scanner connectivity.
Introduction to system, family, and option codes for barcode-based scanner programming.
Step-by-step guides for applying configuration settings using barcode sequences.
Options for selecting the communication interface between the scanner and the host device.
Settings for keyboard emulation, layout, and character transmission for PC compatibility.
Configuration parameters for serial communication, including data framing and handshaking.
Settings for wand or laser emulation modes on specific IDM1xx scanner models.
How to configure the scanner to read specific barcode symbologies and control their transmission.
Operation modes available for corded IDM scanners, like low power and trigger modes.
Operation modes specific to IDM Bluetooth scanner models.
Configuration for buzzer tones, power LED, good read indicators, and vibration feedback.
Adjusting the volume level for the scanner's buzzer.
Settings for barcode read redundancy and inverse reading for 1D codes.
Controls for reread delay to prevent duplicate reads and good read delay for sequential scanning.
Settings for light source duration and timeout for hands-free operation.
Manages transition between hands-free and manual trigger modes based on inactivity.
Controls for automatic presentation mode switching and sensitivity adjustment.
Settings for presentation modes, scan rate adaptability, and flash duty cycle.
Adjusting LED illumination and background lighting for presentation mode.
Settings for aiming laser, delay timers, and decode aiming behavior.
Options for centering barcode reads and ensuring unique barcode data output.
Settings for indicating barcode reading direction and transmission of direction marks.
Adjusting motion tolerance levels for improved scanning of moving items.
Settings for date and time stamping scanned data.
Defines the format for outputting stored data, including combinations of data, quantity, and timestamp.
Optimizes scanner performance for different environments and barcode types.
Settings for scanning outside radio coverage and configuring beeps for connection status.
Timers for radio disconnection, sleep mode, and automatic power off to conserve battery.
Configuration for batch scanning operations using Bluetooth connectivity.
Settings for Bluetooth device name, PIN code, and authentication.
Adjusting HID link quality and enabling Bluetooth power saving modes.
Enabling and configuring the batch reading feature for scanning sequences.
Settings for data prefixes, suffixes, length transmission, and symbology ID inclusion.
Tool for editing scanned data, selecting symbologies, and inserting characters at specific positions.
Feature for advanced verification of scanned data to ensure accuracy.
Tool to replace characters or data strings within scanned barcodes.
Tool to organize scanned data, including excluding or including identification positions.
List of option codes for selecting specific barcode symbologies for data processing.
Tables to calculate actual positions for data insertion or identification within strings.
A practical example demonstrating the use of DataWizard tools for barcode processing.
Step-by-step guide for configuring corded and Bluetooth scanners using the software.
Procedures for upgrading scanner and cradle firmware using the IDM Set Up Tool.
Table mapping symbology IDs, primary formats, and SICK/AIM codes for 1D barcodes.
Table mapping symbology IDs for 2D and Postal barcodes with SICK/AIM codes.
Reference table for keyboard function codes, ASCII values, and control outputs.
Table showing ASCII values and HEX codes for various characters and country-specific layouts.
Reference table for GS1-128 ASCII characters and their corresponding Hex values.
Table listing Application Identifiers and their requirements for data terminal and barcode transmission.
Quick commands for setting the host interface mode on the scanner.
Quick commands to set various operation modes for corded and Bluetooth scanners.
Quick commands for setting the link mode on IDM Bluetooth scanners.
Barcodes for system commands like PROGRAM, SYSLIST, Default settings, and Setup Tool.
Visual reference of option codes (0-9, A-F) used for scanner configuration.
To Next Page
