SICK IDM series User Manual

Operating Instructions
Operation Control
IDM corded
& IDM Bluetooth
8017159/142O/2019-05-23
© SICK AG · Germany · All rights reserved · Subject to change without notice
83
3.9.4 Reread Delay, Good Read Delay Control
PROGRAM
F_DEFAULT
Family Code Selection P.C. Parameter Selection Option Code
Reread Delay
(Double Scan Verification)
SS Disable 0
SS Immediate time out  1
SS Short time out 2
SS Medium time out 3
SS Long time out 4
SS Force verification 5
Good Read Delay
SS None  0
SS 200 msec. 1
SS 500 msec. 2
SS 1 sec. 3
SS 1.5 sec. 4
SS 2 sec. 5
SS 3 sec. 6
HID Mode Transmit Delay
SS None  FIN
MS 1-250 msec. (3 digits)
Scan 3 digits from the option code chart in
Appendix, then IDM will terminate this selection
automatically.
The Reread Delay (Double Scan Verification)
This function is designed to inhibit the Hand-held scanner from reading the same bar code label twice in pre-
defined short duration. Force Verification will not allow the reading of the same bar code twice.
IDM1x0: The Reread Delay function is only available when using the Hands-free stand.
IDM2x0: The Reread Delay function is only available in Multiple Read mode or when using the Hands-
free stand.
Good Read Delay
This Good Read Delay is the minimum amount of time before the Hand-held scanner can read another
barcode.
HID Mode Transmit Delay
This HID Mode Transmit Delay will affect HID mode; when the scanner pairs with the Android, set this to
70 ms to avoid data loss.

SICK IDM series Specifications

General

Brand	SICK
Model	IDM series
Category	Barcode Reader
Language	English