NOTICE
B
y default, the localization controller is a programmable device. When using the local‐
ization controller with the application software LiDAR-LOC, the controller is converted
into an application device. This means that the device cannot be programmed any
longer; it is locked for any additional application and cannot be unlocked.
Complementary information
Y
ou can find additional information of the localization controller in the operating instruc‐
tions 8023299.
SUPPORTED HARDWARE 3
8024819/2019-09-02 | SICK T E C H N I C A L I N F O R M A T I O N | LiDAR Localization Hardware Integration
7
Subject to change without notice
To Next Page
Loading...
