4 Mounting the safety laser scanner directly
Direct mounting: B
T
he safety laser scanner has 4 M5 threaded holes on the back. If you are able to drill
through the mounting surface from the rear, you can mount the safety laser scanner
directly using these threaded holes.
b Use either the rear 1 or the side 2 M5 threaded holes for direct mounting.
b
Use all four rear or all four side M5 threaded holes for direct mounting, so that the
values given in the data sheet for vibration and shock resistance are achieved.
b
Maximum depth of thread engagement: 7.5 mm.
b
Tightening torque: 4.5 Nm to 5.0 Nm.
5 Connection overview
MICSX-ABIZZZZZ1 (part number: 2073156)
6 Pin assignment
6.1 Connecting cable with M12 plug connector
Male connector, M12, 8-pin, A-coded.
Pin Designation Function Wire color
1)
1 +24 V DC Supply voltage (+24 V DC) Brown
2 OSSD 1.A OSSD pair 1, OSSD A White
3 0 V DC Supply voltage (0 V DC) Blue
4 OSSD 1.B OSSD pair 1, OSSD B Black
5 Uni-I/O 1 Universal I/O 1 Gray
6 Uni-I/O 2 Universal-I/O 2 Pink
7 Uni-I/O 3 Universal-I/O 3 Violet
8 FE Functional earth/shield Orange
1)
Applies to the extension cables recommended as accessories.
MOUNTING INSTRUCTIONS
10
M O U N T I N G I N S T R U C T I O N S | microScan3 Core I/O 8017779/ZYM7/2018-05-15 | SICK
Subject to change without notice
To Next Page
Need help?
General
