1 About this document
Please read these operating instructions carefully before you begin working with the
PGT-12-Pro.
1.1 Purpose of this document
These operating instructions are used to guide technical personnel working for the
machine manufacturer/operator in commissioning and operating the PGT-12-Pro.
1.2 Symbols used
CAUTION
Sicherheitshinweise
A warning indicates a specific or potential hazard. This is intended to protect you
against harm.
Read and follow the safety notes carefully.
Notes on disposal
Read the notes on disposal carefully.
1.3 Related documents
•
Operating instructions for the encoder (AHS/AHM36 CANopen)
•
Operating instructions for the encoder (AHS/AHM36 SAE J1939)
•
Operating instructions for the inclination sensors (TMS/TMM)
1.4 Maintenance and repairs
The PGT-12-Pro is maintenance-free. It is not designed to be repaired in the event of a
defect.
1.5 Disposal
•
Always dispose of unserviceable devices in compliance with local/national rules
and regulations with respect to waste disposal.
•
Your PGT-12-Pro uses long-life batteries. If these need to be replaced, see “Insert‐
ing/Replacing batteries”.
Battery disposal
Batteries must not be disposed of with household waste! Please contact your
local waste authority.
NOTE
We would be happy to help you dispose of these devices. Please contact us.
2 Product description
The PGT-12-Pro is a programming tool that you can use to easily program programma‐
ble SICK devices (see "Technical data").
Programming can be carried out in the office, in the production plant, or outdoors. A
PC/laptop and grid connection are not required.
OPERATING INSTRUCTIONS
22
O P E R A T I N G I N S T R U C T I O N S | PGT-12-Pro 8019724/1EJJ/2022-01-05 | SICK
Subject to change without notice
To Next Page
Loading...
Need help?
General
