To Next Page
M
Mark HodgeSep 13, 2025
Why is the anchor not released on my Side-Power Boating Equipment?
- WWillie EvansSep 13, 2025
If the anchor is not released, it might not release from the bracket if mounted incorrectly.
Why is the anchor not released on my Side-Power Boating Equipment?
If the anchor is not released, it might not release from the bracket if mounted incorrectly.
General| Voltage | 12V |
|---|---|
| Weight | 3.5 kg |
| Type | Bow Thruster |
| Shaft Seal | Lip Seal |
| Thrust | 200 N |
| Motor Type | DC |
Safety and operational guidelines for using Side-Power windlasses.
Operating the windlass for docking using a remote control.
Procedure for docking using a fixed switch panel.
Procedure for fitting stop rings for the auto stop function.
Detailed steps for fitting the auto stop rings using pliers.
Illustrates the electrical connections for the windlass system.
Guidelines for installing the control unit.
Steps for connecting motor and battery to the control unit.
Details on installing the main switch and circuit breaker.
Comprehensive specifications and data for the MIDI 201 windlass.
Solutions for common faults and operational issues.