Siebeck GmbH Translation of the original operating manual jet_in_bed_0315
Seite 17
One normal length and one short loop
The knotter is not closing properly. Tension
spring for the knotting lock is too weak. The
stripper does not rest on the knotter.
Single loop
The knot has only a single loop. The second loop
is drawn through. Increase the spring pressure on
the twine button. The lead end of the string which
protrudes from the twine button must not move
when the tying arm starts up.
Loop ends torn
Upper or lower finger of knotter or stripper has
sharp edges.
The perfect knot
A correct knot has two loops of equal length
and one short and one long end of string.
The knot is tight and hard.
To Next Page
Loading...
