Siebeck GmbH Translation of the original operating manual jet_in_bed_0315
Seite 4
Introduction
This machine has been engineered in accordance with the recognised rules
of technology and in adherence to the regulations for occupational safety and
the prevention of accidents so that proper use cannot not cause any
hazards for the life and limb of the user or third parties.
Information on incorrect use and residual risks, which are still in place or
possible despite the integrated safety and technical protective
equipment, are described and illustrated on pages 43-47. These risks are
documented in a risk analysis and filed by the manufacturer.
Every person on the user's premises given the task of setting
up, commissioning, operating, maintaining and repairing this
machine must have read and understood this operating
manual, and in particular the chapter "Safety".
The customer's own changes, restrictions or upgrades and the resultant
safety-related consequences are at the expense and risk of the user.
If this machine is sold or set up at another location, this
operating manual must be handed over to the new owner or the
new user. Additional copies can be ordered from the address
given below, quoting article number 0914FRT-A-MKIVbed.
Friedrichsdorfer Landstrasse 65
D - 69412 Eberbach
Telephone 0049 6271-92080
Fax 00496271-920888
E-mail: info@siebeck.de
Internet: www.siebeck.de
To Next Page
Loading...
