1
LOGO! Manual
A5E00067781 01
1 Getting to Know LOGO!
What is LOGO! ?
LOGO! is the universal logic module from Siemens.
LOGO! integrates
Control functions
An operating and display unit
Power supply
An interface for program modules and a PC cable
Ready-to-use basic functions that are often required in
day-to-day operation, such as functions for on/off delays
and current impulse relays
Time switch
Binary markers
Inputs and outputs according to the device type
What can LOGO! do?
You can use LOGO! for domestic and installation engineer-
ing tasks (e.g. stairway lighting, external lighting, sun
blinds, shutters, shop window lighting etc.), switch cabinet
engineering and mechanical and apparatus engineering
(e.g. gate control systems, ventilation systems, or rainwa-
ter pumps etc.).
You can also use LOGO! for specific control systems in
conservatories or greenhouses, for signal preparation in
control systems and, with the ASi variant, you can have
on-site centralized control of machines and processes.
There are special variants without an operating unit for se-
rial applications in the construction of small machines, ap-
paratus and control cabinets and the field of installation.
To Next Page
Loading...
Need help?
General
