4-6
Primer: S7-300 Programmable Controller, Quick Start
C79000-G7076-C500-01
For the TLIGHT sample program, you need a project structure in which you
can store the relevant data for this control task.
You have already learned on the
previous page what a project
structure looks like. Now make one
yourself!
The table below shows you step-by-step how to create a project and a station:
Step Procedure Result
1.
Click on the menu command File → New →
Project... in the SIMATIC Manager or click on
the relevant icon in the toolbar.
In the next dialog box, enter the name ‘TLIGHT’
and click on “OK” to create the project.
The new project with the name ‘TLIGHT’ is
displayed. You can now insert further objects.
2.
Add a station to the open project with the menu
command Insert → Hardware → SIMATIC
300 Station.
In the project window, click on the “+” in front
of the project symbol if the station is not
displayed.
The station and its name are displayed in the
project window.
You have now inserted a hardware station in the
project “TLIGHT”.
Introduction
How Do You
Proceed?
Working with the STEP 7 Programming Software
This is How You Create a Project Structure!
To Next Page
Loading...
Need help?
General
