Siemens 6ES7134-4JB00-0AB0 - Properties; 2 AI TC ST Module Features; Terminal Assignment Details

2AI TC ST analog electronic module (6ES7134-4JB00-0AB0)
Manual, 04/2007, A5E01076883-01
7
Properties
1
1.1 2AI TC ST analog electronic module (6ES7134-4JB00-0AB0)
Properties
● 2 inputs for thermocouple or voltage measurement
● Input ranges:
– Voltage measurement: ± 80 mV, resolution 15 bits + sign
– Thermocouples: Type E, N, J, K, L, S, R, B, T, resolution 15 bits + sign
● Isolated from the load voltage L+
● Linearization of the sensor characteristic curves
● Permissible common mode voltage 2 VAC
SS
● Extended temperature range from 0 to 50°C with vertical installation
General terminal assignment
Note
Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.
Terminal assignment for 2AI TC ST (6ES7134-4JB00-0AB0)
Terminal Assignment Terminal Assignment Notes
1 M
0+
5 M
1+
2 M
0-
6 M
1-
3 M
ana
7 M
ana
4 n.c. 8 n.c.
A4 AUX1 A8 AUX1
A3 AUX1 A7 AUX1
• M
n+
: Measuring line positive, Channel n
• M
n-
: Measuring line negative, Channel n
• M
ana
: Ground of the module
• n.c.: Not connected (max. 30 VDC can be connected)
• AUX1: Protective-conductor terminal or potential bus (freely usable
up to 230 VAC)