To Next PageTo Next Page
Need help?Do you have a question about the Siemens 6ES7134-4JB00-0AB0 and is the answer not in the manual?
General| Product Type | Digital input module |
|---|---|
| Product Brand Name | SIMATIC |
| Number of Inputs | 8 |
| Input Voltage | 24 V DC |
| Supply Voltage | 24 V DC |
| Rated Value (DC) | 24 V |
| Electrical Isolation | Yes |
| Module Type | DI 8 |
Explains the manual's role in supplementing operating instructions and aiding commissioning, covering its applicability.
Outlines necessary automation engineering knowledge and provides information on additional support resources.
Details training center offerings and provides contact methods for technical support and online services.
Lists key features: 2 inputs, input ranges, isolation, linearization, and operating temperature.
Provides general terminal assignments for the 2AI TC ST module and notes on specific terminals.
Presents various terminal modules compatible with the 2AI TC ST, detailing their connection types.
Illustrates the functional block diagram of the 2AI TC ST analog input module.
Details dimensions, weight, electrical data, isolation, current consumption, and diagnostic functions.
Specifies limits for noise suppression, common-mode interference, crosstalk, and various error sources.
Offers data for sensor selection: input ranges, voltage limits, and characteristic curve linearization.
Explains methods for compensating thermocouple measurements using boxes or Pt100 sensors.
Lists configurable parameters: group diagnostics, overflow/underflow, wire-break check, and measurement types.
Explains the smoothing parameter for digital filtering and its effect on step response and filter time constants.
Describes how to interpret the SF LED for module status, configuration, and error conditions.
Details error codes, meanings, and remedies for analog input modules, including parameter assignment and line faults.
Explains how analog signals are acquired, evaluated, and converted to digital values for processing.
Details the binary representation of analog values in SIMATIC S7 format, including sign and bit significance.
Shows output values in decimal, hexadecimal, and binary for different resolutions (11, 12, 13, 15 bit+sign).
Provides digitized analog values for measuring ranges of thermocouple types B, E, J, K, L, N, R, S, and T.
Lists digitized analog values for the ±80 mV voltage measuring range and wire break diagnostics.
Explains how PLC operating state and supply voltage affect analog input values.
Describes how input values within or outside the range affect the module's response and diagnostics.
Guides on connecting sensors, including cable requirements and analog input module electrical isolation.
Details connecting isolated measuring encoders, addressing common mode voltage and shielding.
Explains connecting non-isolated encoders, common mode voltage, and equipotential bonding.
Provides methods for connecting thermocouples, including comparison point compensation techniques.
Details parameter settings for reference junctions for the 2AI TC and interface modules.
Outlines rules for wiring unused analog input channels, including parameter settings and jumpers.
Recommends best practices for using shield connections to prevent interference for analog electronic modules.
