Siemens 7SK80 - Page 354

Technical Data
4.1 General Device Data
SIPROTEC, 7SK80, Manual
E50417-G1140-C344-A5, Release date 11.2012
354
Profibus FO (DP)
FO connector type ST connector
Double ring
Terminal Back case bottom, mounting location "B"
Transmission speed Up to 1.5 MBd
Recommended: > 500 kBd with normal casing
Optical wavelength λ = 820 nm
Laser Class 1 according to EN
60825-1/-2
When using glass fiber 50 μm 125 μm or
glass fiber 62.5 μm/125 µm
Permissible optical signal at-
tenuation
max. 8 dB, with glass fiber 62.5/125 µm
Bridgeable distance max. 2 km
DNP3.0 /MODBUS RS485
Terminal Back case bottom, mounting location "B", 9-
pin DSUB socket
Test voltage 500 V; 50 Hz
Transmission speed Up to 19,200 Bd
Bridgeable distance max. 1 km
DNP3.0 /MODBUS FO
FO connector type ST connector transmitter/receiver
Terminal Back case bottom, mounting location "B"
Transmission speed Up to 19,200 Bd
Optical wavelength λ = 820 nm
Laser Class 1 according to EN
60825-1/-2
When using glass fiber 50 μm/125 μm or
glass fiber 62.5 μm/125 µm
Permissible optical signal at-
tenuation
max. 8 dB, with glass fiber 62.5 μm/125 µm
Bridgeable distance max. 1.5 km
Ethernet electrical (EN 100) for
DIGSI
IEC61850
DNP3 TCP
PROFINET
or SICAM I/O unit 7XV5673
Terminal Back case bottom, mounting location "B",
2 x RJ45 socket
100BaseT in acc. with IEEE802.3
Test voltage (with regard to the
socket)
500 V; 50 Hz
Transmission speed 100 Mbit/s
Bridgeable distance 21.87 yd
Ethernet optical (EN 100) for
DIGSI
IEC61850
DNP3 TCP
PROFINET
or SICAM I/O unit 7XV5673
Terminal Back case bottom, mounting location "B",
Duplex-LC, 100BaseF acc. to IEEE802.3
Transmission speed 100 Mbit/s
Optical wavelength 1300 nm
Bridgeable distance max. 2 km (1.24 mi)