Siemens 7SK80 - Information List

Functions
2.1 General
SIPROTEC, 7SK80, Manual
E50417-G1140-C344-A5, Release date 11.2012
37
2.1.2.4 Information List
674 W2S day Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Sunday day of time set winter to summer
675 W2S hour 1 .. 24 2 hour of time set winter to summer
676 S2W month 1 .. 12 10 month of time set summer to
winter
677 S2W week 1 .. 5 5 week of time set summer to winter
678 S2W day Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Sunday day of time set summer to winter
679 S2W hour 1 .. 24 3 hour of time set summer to winter
700 GOOSE-Stop YES
NO
NO GOOSE-Stop
No. Information Type of In-
formation
Comments
- >Light on SP >Back Light on
- Reset LED IntSP Reset LED
- DataStop IntSP Stop data transmission
- Test mode IntSP Test mode
- Feeder gnd IntSP Feeder GROUNDED
- Brk OPENED IntSP Breaker OPENED
- HWTestMod IntSP Hardware Test Mode
- SynchClock IntSP_Ev Clock Synchronization
- Distur.CFC OUT Disturbance CFC
1 Not configured SP No Function configured
2 Non Existent SP Function Not Available
3 >Time Synch SP_Ev >Synchronize Internal Real Time Clock
5 >Reset LED SP >Reset LED
15 >Test mode SP >Test mode
16 >DataStop SP >Stop data transmission
51 Device OK OUT Device is Operational and Protecting
52 ProtActive IntSP At Least 1 Protection Funct. is Active
55 Reset Device OUT Reset Device
56 Initial Start OUT Initial Start of Device
67 Resume OUT Resume
68 Clock SyncError OUT Clock Synchronization Error
Addr. Parameter Setting Options Default Setting Comments