Siemens A52 - Divert; Set divert

Setup
48
A52 Fox en, A31008-H6250-A1-1-7619 (4. July 2003, 15:54)
© Siemens AG 2002, I:\Mobil\A52_Fox\en\A52_Setup.fm
Divert
You can set the conditions for which
calls are diverted to your mailbox or
other numbers.
§Menu§
KSetupKDivert
KSelect a function
Set divert
The most common condition for
divert is:
Unanswered calls
G
Select Unanswered.
(covers the Not reachable,
No reply, Busy conditions)
§Select§ Press.
Set Select.
J
Enter the phone number
to which the caller will
be diverted (if not done
already)
or
· select this phone number
from the Phonebook or
via §Mailbox§.
§OK§ Confirm. After a short
pause, the setting is con-
firmed by the network.
All calls
All calls are diverted.
n Symbol in the top line of
the display in standby
mode.
Status check
You can check the current divert sta-
tus for all conditions.
After a short pause, the current situ-
ation is transmitted by the network
and displayed.
p Condition set.
o Not set.

Display, if status is un-
known (e.g. on a new
SIM card).
L
L