EasyManua.ls Logo

Siemens Asterisk OpenStage 15

Siemens Asterisk OpenStage 15
284 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
inbetriebnahme.fm
A31003-S2000-M102-3-76A9, 08/07/2009
Asterisk - OpenStage Family, Administration Manual
2-1
Startup
Prerequisites
2Startup
2.1 Prerequisites
The OpenStage phone acts as an endpoint client on an IP telephony network, and has the fol-
lowing network requirements:
An Ethernet connection to a network with SIP clients and servers.
Asterisk SIP server.
An FTP Server for file transfer, e. g. firmware, configuration data, application software.
A DHCP (Dynamic Host Configuration Protocol) server (recommended).
DLS (Deployment Service) for advanced configuration and software deployment
(recommended).
7
Only use switches in the LAN, to which the OpenStage phone is connected. An
operation at hubs can cause serious malfunctions in the hub and in the whole
network.

Table of Contents

Related product manuals