24/36
Siemens Climatix HMI-DM CB1P3916en02
Building technologies Functions and operations 2015-07-02
By quickly turning the knob of key ROLL, users can change the value in a large
extent. The indicator “▼” clearly shows which digit is being edited. The arrow “↓”
indicates the position of the value at the ruler of data range.
The current value is “42”.
Turn the knob of key ROLL clockwise quickly. Then the indicator “▼” will shift from
units to decades, and the value “42” will change to “52”.
The same procedure can be used to change value by hundreds or higher. If there
is no operation for 0.5 second, the indicator “▼” will move back to the previous
digit.
A dedicated page is used to edit the binary and enumeration type of value. The
page of binary and enumeration list is illustrated as follows:
On this page, select an item and press key ROLL.
A dedicated page is used to edit the multi-choice type of value. Turn the knob and
press key ROLL to choose the multiple options. At the very bottom of the options, a
fixed item Done is available for users to confirm the selection and exit.
Press key ESC to exit and all the modifications will be cancelled.
Editing binary and
enumeration value
diting multi-choice
To Next Page
Loading...
Need help?
General
