8/36
Siemens Climatix HMI-DM CB1P3916en02
Building technologies Connections 2015-07-02
Upon connecting, the HMI-DM can automatically detect and allocate an individual
address for itself, supporting plug-and-play feature. The HMI-DM is able to detect
all devices on the network segment and display their device name and individual
address (if available), and the supported controllers will be marked as accessible
(refer to
section 4.3 Controller access for details). The HMI-DM must exit from
the connection with one controller before accessing to another one.
2.3 Network with both local and remote
connection
More than one HMI-DM can access to one dedicated controller simultaneously, no
matter whether the connection is local or remote. One locally connected HMI-DM
and other remotely connected HMI-DMs can work together.
The connection of example is shown as follows:
2.4 USB interface
The HMI-DM is equipped with a USB interface. Users can connect the HMI-DM to
a PC via USB interface to upgrade the firmware.
The connection with PC is illustrated as follows:
Locally and remotely
simultaneous
To Next Page
Loading...
Need help?
General
