Siemens Climatix HMI-DM User Manual

25/36
Siemens Climatix HMI-DM CB1P3916en02
Building Technologies Functions and operations 2015-07-02
The value can be directly editable on the parameter list page.
If there are more than one writable data point in one line, press key ESC to cancel
the input of the current line.
If one of the writable data points is multi-choice type, users cannot change this data
point.
4.9 Alarm management
If an error occurs, the ALARM LED will blink. As soon as the alarm is
acknowledged, the ALARM LED will be in red. If no alarm exists, the ALARM LED
will turn off. The alarm related pages in SCOPE are listed as follows:
Name
No.
1
Alarm list detail page
[65110]
2
Alarm list page
[65100]
3
Alarm history list page
[65200]
4
Alarm list/history settings page
[65120]
Press key ALARM, and the alarm related pages will be displayed by the following
order: Alarm list detail →Alarm list →Alarm history list →Alarm list/history settings.
In
-place editing: multi-
value in one line
Alarm management
Alarm list detail page
Alarm list page

Siemens Climatix HMI-DM Specifications

General

Brand	Siemens
Model	Climatix HMI-DM
Category	Touch terminals
Language	English