26/36
Siemens Climatix HMI-DM CB1P3916en02
Building technologies Functions and operations 2015-07-02
If one of the four pages does not exist, the next page will be displayed directly.
On Alarmlist and AlarmHistory pages, select Acknowledge to acknowledge all
active alarms and it will go to the confirmation page as follows:
By default, the ALARM LED will be blinking in red at the intervals of one second if
there are unacknowledged active alarms. The ALARM LED will be constant light in
red if there is an active and acknowledged alarm.
The specific sorting methods of alarms can be defined by application engineer.
Users can choose to view the alarm information by the order of time, object ID,
class and state.
To change the sorting methods, select SortOrder1 or SortOrder2 on the
Alarmlist/-historysettings page, and the following page will be displayed.
Select one sorting method on this page and press key ROLL to confirm the
selection.
list
To Next Page
Loading...
