Siemens CU240B-2 Compact Operating Instructions

Installing
3.4 Terminal strips on CU240E-2 Control Units
CU240B-2 and CU240E-2 Control Units
Compact Operating Instructions, 04/2015, A5E35792002B AA
17
Changing the function of the terminals
The function of the terminals marked in color in the two figures above, can be set.
In order that you do not have to successively change terminal for terminal, several terminals
can be jointly set using default settings ("p0015 Macro drive unit").
The factory settings of the terminals for USS/Modbus and PROFIBUS/PROFINET described
above correspond to the following default settings:
● p0015 = 12
– Setting using the commissioning tools STARTER, Startdrive and the IOP operator
panel: "Standard I/O with analog setpoint"
– Setting using the BOP-2 operator panel: "Std ASP"
● p0015 = 7
– Setting using STARTER, Startdrive and the IOP operator panel: "Fieldbus with data
set switchover"
– Setting using BOP-2: "FB cdS"
Further default settings can be found in the Operating Instructions, see also: Manuals for
your inverter (Page 31).

Siemens CU240B-2 Specifications

General

Brand	Siemens
Model	CU240B-2
Category	Inverter
Language	English