Siemens et 200sp - Documentation guide; Basic information; Device information; General information

Server module (6ES7193-6PA00-0AA0)
Manual, 03/2015, A5E03575337-AB
9
Parameters/address space
3
3.1
Parameters
Parameters for the server module
The effective range of the configurable parameter depends on the type of configuration.
Possible configuration: Distributed operation on PROFINET IO in an ET 200SP system.
When assigning parameters in the user program, use the "WRREC" instruction to transfer
the parameter to the module by means of data records, see section Parameter assignment
and structure of parameter data record (Page 19).
The following parameter settings are possible:
Table 3- 1 Configurable parameter and its default (GSD file)
Parameters
Range of values
Default
Reconfiguration in
RUN
Effective range with configuration
software, e.g., STEP 7 (TIA Portal)
GSD file
PROFINET IO
GSD file
PROFIBUS DP
Group diagnostics: No
supply voltage L+
• Disable
• Enable
No Yes ET 200SP ---