Siemens FC901 - How to Activate;Deactivate

Programming Manual of FC2005/FC901
18|63 A6V10333724_b_en_--
4. HOW TO ACTIVATE/DEACTIVATE
Function: Any output (i.e., control module, NAC devices etc.) can be activated/deactivated through controller
manually.
Steps to activate (i.e., NAC activate):
1. Select a device (NAC) by navigating hardware tree (Fig. 7-1).
2. Press “Menu” to display the main menu (Fig. 7-2).
3. Press “→” to select “Oper” submenu (Fig. 7-3). Press “↓” to
select “Activate” and press “OK” to activate the device.
Steps to deactivate:
Same as the steps to activate. The only difference is to select
“Deactivate” instead of “Activate” in step 3.
Fig.7-1
Fig.7-2
Fig.7-3