Siemens FC901 - How to Set Time

Programming Manual of FC2005/FC901
24|63 A6V10333724_b_en_--
9. HOW TO SET TIME
Function: To configure the date and time of the system and the display format.
Steps:
1. Press “Menu” to display the main menu (Fig.12-1).
2. Press “→” to select “Oper” submenu (Fig.12-2), press "↓" to
select “Set time” and press “OK”. The Date&Time parameter
screen is displayed (Fig.12-3).
3. Select “TimeFormat” to set the preferred time format (Fig.12-4).
4. Select “System Time” to change the system time (Fig.12-5).
5. Enter new time and press "OK" to finish time setting and return
to previous screen (Fig.12-6).
Fig.12-1
Fig.12-2
Fig.12-3
Fig.12-4
Fig.12-5
Fig.12-6