3
17 |
Building Technologies
3.3 Function
3.3.1 Danger levels
The manual call point can transmit the following danger levels to the control panel:
Danger level Meaning
0 Normal state, no danger
3 Alarm
The evaluation of the danger level and the resulting measures (e.g. activation of
remote transmission) are configured on the control panel.
3.3.2 Test mode
The manual call points can also be tested with the key.
A test mode must be set on the control panel to test the manual call points. When
in test mode, alarms from the manual call points are not forwarded by the control
panel.
See also
2 Testing detector with the key [➙ 27]
To Next Page
Loading...
