8
30 | 32
8.2 Dimensions
Figure 10: Dimensional drawings for FDM1101-Rx and back box FDMH295-R / FDMH295-S
8.3 Environmental compatibility and disposal
This equipment is manufactured using materials and procedures
which comply with current environmental protection standards as
best as possible. More specifically, the following measures have
been undertaken:
● Use of reusable materials
● Use of halogen-free plastics
● Electronic parts and synthetic materials can be separated
Larger plastic parts are labeled according to ISO 11469 and
ISO 1043. The plastics can be separated and recycled on this basis.
The device is considered an electronic device for disposal in
accordance with the European Guidelines and may not be disposed
of as domestic garbage.
● Dispose of the device through channels provided for this
purpose.
● Comply with all local and currently applicable laws and
regulations.
87
35.5
20
113
To Next Page
Loading...
Need help?
General
