<Reset>
Resets all 'Events' which can be reset.
Configurable buttons
You can assign e.g. the following functions to the configurable buttons:
● Bypass and enable 'Zones'
● Switch test mode on and off
● Activate and deactivate alarm indicator
4.2 Display
The display has two areas:
07:55:31ABCDE FGHI
ABCD: 3
ABCD: 421 ABC: 32 XXX YYY ZZZ
ABCDEFGHI AAA/BBB
ABCD: 026 ABC: 75 XXX YYY ZZZ
ABCDE CCC
1
2
Figure 3: Display depiction with two messages displayed
1 Header 2 Depiction area
4.3 Key switch
You can use the key switch to release operation.
The key switch has two positions:
● ON (horizontal position)
● OFF (vertical position)
PMI
Display
4
16 | 22 A6V10333444_h_en_--
To Next Page
Loading...
Need help?
General
