Siemens FT2015 User Manual

2 Safety
2.1 Safety instructions
The safety notices must be observed in order to protect people and property.
The safety notices in this document contain the following elements:
● Symbol for danger
● Signal word
● Nature and origin of the danger
● Consequences if the danger occurs
● Measures or prohibitions for danger avoidance
Symbol for danger
This is the symbol for danger. It warns of
risks of injury
.
Follow all measures identified by this symbol to avoid injury or death.
Additional danger symbols
These symbols indicate general dangers, the type of danger or possible
consequences, measures and prohibitions, examples of which are shown in the
following table:
General danger Explosive atmosphere
Voltage/electric shock Laser light
Battery Heat
Signal word
The signal word classifies the danger as defined in the following table:
Signal word Danger level
DANGER
DANGER identifies a dangerous situation, which
will result directly in death or serious
injury
if you do not avoid this situation.
WARNING
WARNING identifies a dangerous situation, which
may result in death or serious
injury
if you do not avoid this situation.
CAUTION
CAUTION identifies a dangerous situation, which
could result in slight to moderately
serious injury
if you do not avoid this situation.
NOTICE NOTICE identifies possible damage to property that may result from non-observance.
How risk of injury is presented
Information about the risk of injury is shown as follows:
Safety
Safety instructions
2
A6V10333444_h_en_-- 9 | 22

Siemens FT2015 Specifications

General

Brand	Siemens
Model	FT2015
Category	Touch terminals
Language	English