Siemens FT2015 User Manual

1 About this document
Safekeeping and availability
NOTICE
Missing information
Damage due to misuse
● This document must remain available in a usable condition throughout the entire
life cycle of the product. Keep the document safe so that it can be consulted and
make sure that it is accessible to the relevant target groups.
If you require an additional copy of this document, please contact Customer Service.
Goal and purpose
This document describes the operation of the remote terminal FT2015 in a fire
detection system or Fire detection and voice evacuation system. The reader shall
become familiar with the possible indications and operating functions on the terminal,
as well as with the functionality of the terminal in the overall system. This allows the
reader to respond appropriately in the event of fire or trouble.
Scope
This document applies to the remote terminal type FT2015.
Regional or country-specific variations/availability are identified with square brackets,
as follows:
● [UL]: Valid for UL-regulated region
● [ULC]: Valid for Canada
Target groups
The information in this document is intended for the following target groups:
Target group Activity Recommended qualification
Operating personnel ● Carries out procedures to correctly
operate the product.
● No particular basic training is needed.
● Has been instructed by the
commissioning personnel.
Commissioning personnel ● Configures the product at the place of
installation according to customer-
specific requirements.
● Checks the product operability and
releases the product for use by the
operator.
● Searches for and corrects
malfunctions.
● Has obtained suitable specialist
training for the function and for the
products.
● Has attended the training courses for
commissioning personnel.
Maintenance personnel ● Carries out all maintenance work.
● Checks that the products are in
perfect working order.
● Searches for and corrects
malfunctions.
● Has obtained suitable specialist
training for the function and for the
products.
About this document
1
A6V10333444_h_en_-- 5 | 22

Siemens FT2015 Specifications

General

Brand	Siemens
Model	FT2015
Category	Touch terminals
Language	English