51
Sending SMS (text messages)
Gigaset DL500A / GRC EN / A31008-N3103-T101-1-7619 / sms_BRD_neutral.fm / 31.08.10
Version 4, 16.09.2005
Replying to or forwarding SMS
messages
¤ Read the SMS
§Options§ Press the display key.
You have the following options:
Reply
Write and send a new SMS to the sender
(page 48).
Edit
Edit the text in the SMS and return it to
the sender (page 48).
Forward
Forward the SMS to another number
(page 48).
Copying the number to the
directory
Copying the sender's number
¤ Open the incoming list and select the
SMS (
¢ page 50).
§Options§ ¢Copy to Directory
¤ Complete the entry (¢page 38).
Copying/dialling numbers from
an SMS
¤ Read the SMS and scroll to the telephone
number.
The digits are highlighted.
Ó Press the display key.
Complete the entry (
¢ page 38).
Or:
c Pick up the receiver to dial the
number.
If you wish to use the number to send an
SMS:
¤ Save the number with the local area code
(dialling code) in the directory.
If an SMS contains several numbers, the next
number will be highlighted if you scroll
down until the first number disappears from
the display.
SMS with vCard
The vCard is an electronic business card.
It is indicated by the Å icon in the body of
the SMS.
A vCard can include:
u Name
u Private number
u Business number
u Mobile number
u Birthday
Individual entries in a vCard can be saved to
the directory one after the other.
Opening the vCard
¤ Read the SMS containing the vCard.
§View§ Press the display key to open
the vCard.
Then:
§Back§ Press the display key to return to
the SMS text.
Or:
q Select the number.
§Save§ Press the display key.
When you save a number, the directory is
opened automatically. The number and
name are copied. If a birthday is entered on
the vCard, the date is copied to the directory
as an anniversary.
¤ If necessary, edit the entry in the direc-
tory and save it. You will return to the
vCard automatically.
Please note
An attached mailbox identifier is added
to the directory.
Please note
u The + symbol is not transferred for
international area codes.
¤ You should then enter '00' at the
start of the number.
u If there are no more entries available
in the directory, you can only over-
write or modify an existing entry.
To Next Page
Loading...
