95
Configuring the system settings
Gigaset DL500A / GRC EN / A31008-N3103-T101-1-7619 / settings.fm / 31.08.10
Version 4, 16.09.2005
If there are no handsets or repeaters regis-
tered to the base, the base's DECT interface
is automatically deactivated.
If you switch the base to registration mode
(
¢ page 73) to reregister handsets/repeat-
ers, the DECT interface is automatically reac-
tivated.
Restoring the base to the
default settings
The individual settings are reset.
When the settings are restored:
u Handsets are still registered
u The system PIN is not reset.
The following settings in particular are reset
to the default settings:
u Settings for the ringer melodies and vol-
ume levels
u Settings for wake-up calls and appoint-
ments
u Own area code
u Settings for the local network
u The names of the handsets
u SMS settings (e.g., SMS service centres,)
u Eco Mode and Eco Mode+ are deacti-
vated
u PABX connection settings
u Answering machine settings and per-
sonal announcements are deleted
u Function and display key assignments as
well as key
u Settings for network services: call divert
The following lists are deleted:
u SMS lists
u Call lists
u Answering machine list
v ¢
Ï
¢ System ¢Reset
~ Enter the system PIN and
press
§OK§.
§Yes§ Press the display key.
After resetting, the base is restarted.
Checking the base's MAC
address
Depending on your network configuration,
you may have to enter your base's MAC
address in your router's access control list,
for example. You can check the MAC address
on the base.
In idle status:
v Open menu.
*#Q5# 2Q
Press keys in sequence.
The MAC address is displayed.
§Back§ Return to idle status.
To Next Page
Loading...
