124
Connecting/using other devices
Gigaset DX800A all in one / GRC EN / A31008-N3100-T101-1-7619 / HS_and_other_Devices.fm / 31.08.10
Version 4, 16.09.2005
Connecting and using a
wire-bound headset
You can connect a headset to the base using
a 2.5 mm jack connector.
For details about your headset, see the
accompanying user guide.
Connecting the headset
¤ Before you connect the headset, assign
the Headset function to a function key on
the base (
¢ page 125).
¤ Next, plug the jack connector on your
headset into the connection socket on
your base (
¢ page 12).
Accepting/transferring calls on the
headset
Prerequisite:
u You are talking on the base or
u You are trying to connect to another
party or
u A call is being signalled on the base
¤ Press the function key Headset on the
base to accept the call on the headset.
Calling
¤ Enter the phone number on the base and
press the Headset function key.
Please note
u You should still use the Headset func-
tion key if your headset has a P2T key.
u For instructions on adjusting the
speaking volume on your headset,
¢ page 128.
u If a Bluetooth headset is also regis-
tered with the base and it is in range,
the call/connection is transferred to
the Bluetooth headset. The Bluetooth
headset takes priority.
To Next Page
Loading...
