66
Making calls using network services
Gigaset DX800A all in one / GRC EN / A31008-N3100-T101-1-7619 / netservices.fm / 31.08.10
Version 4, 16.09.2005
¤ Set up an external consultation call
(
¢ page 64).
& Replace the receiver (even
before the other party has
answered) to transfer the call.
VoIP connection:
If you have activated the function Transfer
Call by On-Hook for VoIP (
¢ Web configu-
rator: Telephony
¢ Advanced Settings).
& Replace the receiver (even
before the other party has
answered) to transfer the call.
Identifying nuisance callers –
identify caller function (ISDN)
Identify caller is used to identify annoying or
threatening callers.
Prerequisites:
u You have requested the identify caller
function from your ISDN network pro-
vider.
u You are conducting an external call via an
ISDN connection.
Activate this function during the call or
immediately after the caller has hung up.
You must not end the call yourself i.e., you
must not replace the receiver!
This does not affect any other call that is
being made at the same time.
The caller is identified in the ISDN telephone
exchange and is recorded by phone number,
time and date. A printout of the list is then
sent by your network provider through the
post.
Prerequisite: You are conducting an exter-
nal call or the external call participant has
hung up; however, you are maintaining the
connection.
§Options§ ¢ Identify Caller
You can then continue the call or replace the
receiver.
Functions after a call
Cancelling ringback
Prerequisite: Ringback is activated for your
ISDN connection (page 63).
v
¢ Ç Select Services ¢ Ringback Off
The phone number activated for ringback is
shown in the display.
¤ Press the display key §Delete§ to deactivate
ringback.
Ringback disabled is displayed on the
screen.
Activating/deactivating
network mailbox for your
fixed line connection
Prerequisite: Your phone is connected to
the analogue fixed line. You have requested
the network mailbox from your network pro-
vider.
You can activate and deactivate the network
mailbox from your network provider.
v
¢ ÇSelect Services
¢ Network Mailbox
Status: Activate/deactivate.
§OK§ Press the display key to send a
specific code to the exchange.
¤ After confirmation from the telephone
network, press the red end key T.
Please note
If the ringback was signalled before
you could cancel it, you can end it
using
§Cancel§.
To Next Page
Loading...
