Siemens Gigaset DX800A - Connecting the Base to a PABX; Saving an Access Code (Outside Line Code)

143
Connecting the base to a PABX
Gigaset DX800A all in one / GRC EN / A31008-N3100-T101-1-7619 / PABX.fm / 31.08.10
Version 4, 16.09.2005
Connecting the base to
a PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
guide.
Saving an access code
(outside line code)
You can save two access codes: one for dial-
ling via ISDN or fixed line and one for dialling
via VoIP.
Prerequisite: You must enter an access code
for external calls using your PABX, e.g., "0".
v
¢
Ï
¢ Telep hony ¢Access Code
¤ You can enter data in the following fields:
Access external line with:
For dialling via ISDN or the analogue fixed
line: enter or change the access code,
max. three digits.
For:
Specify when the access code should be
inserted for dialling via ISDN or the fixed
line:
Call Lists
The access code is put in front of numbers
dialled on the base or a handset from one
of the following lists:
– The SMS list
– The accepted calls list
– In the missed calls list
– An answering machine list
All Calls
The access code prefixes all numbers
dialled on the base or a handset.
Off
The access code for ISDN/fixed line is
deactivated. It does not prefix any phone
number.
Access external IP line with:
For dialling via VoIP connections: Enter or
change access code, max. 4 digits.
For:
Specify when the access code should also
be dialled when dialling via VoIP:
Call Lists
For dialling from the SMS list, missed calls
list, accepted calls list or an answering
machine list.
All Calls
For all numbers dialled on the base or a
handset.
Off
No access code should be dialled first for
calls via a VoIP connection.
§Save§ Press the display key.
Please note
u You cannot send or receive SMS mes-
sages on PABXs that do not support
Calling Line Identification.
u There are several ways of assigning an
MSN to ISDN extension systems. For
more information on this topic, please
refer to the user guide belonging to
your extension system.
Please note
The access code never prefixes any emer-
gency numbers or SMS service centre
numbers.