14
First steps
Gigaset DX800A all in one / GRC EN / A31008-N3100-T101-1-7619 / starting.fm / 31.08.10
Version 4, 16.09.2005
2. Connecting the base to the telephone network
1. Pass one end of the phone cable from behind through the recess in the housing.
– Use the 8-pin cable with 2 mini western jacks 8/8 if you wish to connect the
phone to the ISDN network (
¢ page 10, cable 5).
– Use the TAE connection cable with RJ11 plug to connect to the analogue
fixed line (
¢ page 10, cable 6).
2 Plug the telephone cable into the port marked with the ] icon on the under-
side of the base.
3 Then connect the telephone cable to the ISDN or fixed line connection.
3b
2
1
Underside of
the base
3a
Your Gigaset telephone automatically detects which line it is connected to and
the installation wizard later prompts you to make all the necessary settings for
the current connection (
¢ page 18).
To Next Page
Loading...
