Siemens Gigaset S810A - Setting the Date and Time

18
First steps
Gigaset S810-S810A / Grossbritannien / A31008-M2306-L101-1-7619 / starting.fm / 18.03.2011
Version 4.1, 21.11.2007
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm can be used.
Date/Time
Date:
14.10.2011
Time:
00:00
Back Save
¤ Press the key below §Set Time§ on the dis-
play screen to open the input field.
(If you have already set the time and
date, open the input field via the menu
¢ page 30.)
The Date/Time submenu is shown on
the display.
¤ The active input position flashes.
Enter day, month and year as an
8-digit number via the keypad,
e.g., 4Q
2Q for 14/10/2011.
Date/Time
Date:
31.01.2011
Time:
00:00
Back Save
Calls Set Time
Press the right or left control key
to change the input position and
correct an entry.
¤ Enter the hours and minutes in 4-digit
format via the keypad,
e.g., QM5for 07:15 am.
Change the input position with
the control key if necessary.
¤ Press down on the control key to switch
to the time input field.