51
SMS (text messages)
Gigaset S810-S810A / Grossbritannien / A31008-M2306-L101-1-7619 / sms_BRD_neutral.fm / 18.03.2011
Version 4.1, 21.11.2007
SMS troubleshooting
Error codes when sending
Self-help with errors
The following table lists problem situations
and possible causes and provides advice on
troubleshooting.
E0 Calling Line Identification permanently with-
held (CLIR) or Calling Line Identification not
activated.
FE Error occurred during SMS transfer.
FD Connection to SMS centre failed; see self-
help.
You cannot send messages.
1. You have not requested the CLIP service (Call-
ing Line Identification Presentation).
¥ Ask your service provider to enable this
service.
2. SMS transmission has been interrupted (e.g.,
by a call).
¥ Re-send the SMS.
3. The network provider does not support this
feature.
4. No number or an invalid number is entered for
the SMS centre set as the active send service
centre.
¥ Enter the number (¢page 49).
You receive an incomplete SMS.
1. Your phone's memory is full.
¥ Delete old SMS messages (¢ page 46).
2. The service provider has not yet sent the rest
of the SMS.
You have stopped receiving SMS messages.
1. You have changed the ID of your mailbox.
¥ Give your SMS contacts your new ID or
undo the change (
¢page 49).
2. You have not activated your mailbox.
¥ Activate your mailbox (¢ page 49).
3. Call divert (redirecting) is set to When: All
Calls or All Calls is activated for the network
mailbox.
¥ Change the call divert settings
(
¢page 36).
The SMS is played back.
1. The "display call number" feature is not acti-
vated.
¥ Ask your service provider to activate this
function (chargeable).
2. No agreement is in place between your
mobile phone operator and your fixed line
network SMS service provider.
¥ Obtain information from your fixed line
network SMS service provider.
3. Your terminal has been recorded by your SMS
provider as having no fixed line network SMS
functionality, i.e., you are not registered with
the provider.
¥ Send any SMS to automatically register
your telephone to receive SMS.
Messages are only received during the day.
The terminal is recorded in your SMS pro-
vider's database as having no fixed line net-
work SMS functionality, i.e., you are not regis-
tered with the provider.
¥ Obtain information from your fixed line
network SMS service provider.
¥ Send any SMS to automatically register
your telephone to receive SMS.
To Next Page
Loading...
