63
Using multiple handsets
Gigaset S810-S810A / Grossbritannien / A31008-M2306-L101-1-7619 / registr_sett.fm / 18.03.2011
Version 4.1, 21.11.2007
Registering other handsets
You can register other Gigaset handsets and
handsets for other devices with GAP func-
tionality as follows. .
De-registering handsets
You can de-register any other registered
handset from any registered Gigaset S810H
handset.
v
¢
Ï
¢ Registration
¢ De-reg. Handset
s Select the internal subscriber
you wish to de-register and
press
§OK§.
(The handset you are currently
using is highlighted with <).
~ Enter the current system PIN
and press
§Save§.
§Yes§ Press the display key.
Locating a handset ("Paging")
You can locate your handset using the base.
¤ Briefly press the registration/paging key
on the base (
¢ page 5).
¤ All handsets will ring simultaneously
("paging"), even if the ringtones are deac-
tivated.
Ending paging
¤ Briefly press the registration/paging key
on the base or press the talk key c on
the handset.
Changing the base
If your handset is registered to more than
one base, you can set it to a particular base
or to the base that has the best reception
(Best Base).
v
¢
Ï
¢ Registration ¢Select Base
s Select one of the registered
bases or Best Base and press
§Select§.
Making internal calls
Internal calls to other handsets registered on
the same base are free.
Calling a specific handset
u Initiate internal call.
~ Enter the number of the hand-
set.
or:
u Initiate internal call.
s Select handset.
c Press the talk key.
Calling all handsets ("group call")
u Press and hold.
or:
u Initiate internal call.
* Press the star key.
or
Call All Select
c Press the talk key.
All handsets are called.
Ending a call
a Press the end call key.
2) On the base
Within 60 seconds press and hold the reg-
istration/paging key on the base
(
¢ page 5) (approx. 3 seconds).
1) On the handset
Start to register the handset as described
in its user guide.
2) On the base
Press and hold the registration/paging key
on the base (
¢ page 5) (approx. 3 sec.).
To Next Page
Loading...
