77
Setting the base
Gigaset S810-S810A / Grossbritannien / A31008-M2306-L101-1-7619 / registr_sett.fm / 18.03.2011
Version 4.1, 21.11.2007
Protecting against
unauthorised access
Protect the system settings of the base with
a PIN known only to yourself. The system PIN
must be entered when, for example, regis-
tering/de-registering a handset to/from the
base or when restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set on
the base (default setting: 0000) to a 4-digit
PIN known only by you.
Gigaset S810A: Setting a system PIN facili-
tates remote operation of the answering
machine (
¢ page 56).
v ¢
Ï
¢ System ¢ System PIN
~ Enter the current system PIN
and press
§OK§.
~ Enter your new system PIN and
press
§OK§.
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code 0000:
Disconnect the power cable from the base.
Hold down the registration/paging key on
the base while reconnecting the power
cable to the base. Hold down the key for at
least 5 seconds.
The base has now been reset and the system
PIN set to 0000.
Resetting the base to the
factory settings
When the settings are restored:
u Date and time are retained
u Handsets are still registered
u Eco Mode is activated and Eco Mode+ is
deactivated,
u The system PIN is not reset.
v ¢
Ï
¢ System ¢ Base Reset
~ Enter the system PIN and
press
§OK§.
§Yes§ Press the display key.
Please note
All handsets are de-registered and must
be re-registered. All settings are reset to
the factory settings.
To Next Page
Loading...
