85
Appendix
Gigaset S810-S810A / Grossbritannien / A31008-M2306-L101-1-7619 / appendix.fm / 18.03.2011
Version 4.1, 21.11.2007
The operating time of your Gigaset depends
on the capacity and age of the batteries and
the way they are used. (All times are maxi-
mum possible times).
Due to the constant progression in battery
development, the list of recommended bat-
teries in the FAQ section of the Gigaset Cus-
tomer Care pages is regularly updated:
www.gigaset.com/service
Base power consumption
In standby mode:
Gigaset S810: approx. 1.1 watt
Gigaset S810A: approx. 1.2 watt
During the conversation:
Gigaset S810: approx. 1.0 watt
Gigaset S810A: approx. 1.1 watt
General specifications
DECT
Bluetooth
Pin connections on the telephone
jack
Capacity (mAh) approx.
550 700 800 1000
Standby time
(hours)*
140/
50
165/
58
185/
67
230/
83
Talktime (hours) 11121417
Operating time for
1.5 hrs of calls per
day (hours)**
85 95 110 135
Charging time in
base (hours)
7,5 8,5 10 12
Charging time in
charger (hours)
6,5 7,5 8,5 10,5
* without/with display backlight
** without display backlight
(Setting the display Backlight
¢page 71)
DECT standard Is supported
GAP standard Is supported
No. of channels 60 duplex channels
Radio frequency range 1880–1900 MHz
Duplex method Time multiplex,
10 ms frame length
Pulse repetition rate 100 Hz
Pulse transmission
length
370 μs
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission power 10 mW average power
per channel,
250 mW pulse power
Range Up to 300 m outdoors,
up to 50 m indoors
Base power supply 230 V ~/50 Hz
Environmental condi-
tions in operation
+5°C to +45°C, 20% to
75% relative humidity
Dialling mode DTMF (tone dialling)/
PD (pulse dialling)
Radio frequency range 2402–2480 MHz
Transmission power 4 mW pulse power
1unused
2unused
3a
4b
5unused
6unused
To Next Page
Loading...
