Siemens Gigaset SL910 - Making Internal Calls; Accepting a Call

el en 25
Gigaset SL910 KURZ-BA System / GRC eng / A31008-M2300-T101-1-8U43 / telefony.fm / 4/17/12
Version 4.1, 21.11.2007
Making calls
Making internal calls
Internal calls to other handsets registered to the same base are free of charge.
¤ Open the dial page. ¤ Touch [ ‡ Internal]. ¤ If necessary, select the handset from the list
or touch All Handsets (group call).
Accepting a call
¤ Press c.
Or:
¤ If Auto Answer is activated, remove the handset from the charger.
Speaker
If you are going to let someone listen in, you should tell the other party that this is happening.
Activating while dialling
¤ Enter the number, press c twice.
Switching between earpiece and speaker mode
During a call, when establishing the connection:
¤ Press c or touch [ † Speaker].
Placing the handset in the charger during a call:
¤ Press and hold c while placing the handset in the charger and hold for a further 2 seconds.
Activating/deactivating the microphone (muting)
If you turn the microphone off during a call, your caller can no longer hear you.
¤ To activate/deactivate the microphone, touch [ – Mute ].