el en 7
Gigaset SL910 KURZ-BA System / GRC eng / A31008-M2300-T101-1-8U43 / starting.fm / 4/17/12
Version 4.1, 21.11.2007
Getting started
Registering the handset
Handsets contained in the package have already been registered to the base. If, however, a
handset has not been registered (display "Handset not registered to any base"), please register
it manually. You must initiate registration on the base and on the handset:
1) On the base:
¤Press and hold (for approx. 3 seconds) the registration/paging key.
2) On the handset (within 60 seconds):
¤Press Register and if necessary, enter the system PIN
of the base (default setting: 0000) and confirm with è.
Setting up the base and handset — installation wizard
Once the battery has been inserted, the time and date symbols flash. The installation wizard
starts automatically as soon as you touch one of the flashing symbols. It helps you to configure
the following key settings on the handset and base. These keys are required for operation:
u Time and date
u Display language
u Country in which the phone will be used
u Your own area (dial code)
If you do not want to configure the settings at this
point:
¤ Touch the [ Skip Settings] option at the bottom
of the display.
The handset then switches to idle status.
You can configure the settings at a later stage using the
Settings menu on your handset.
If you want to configure the settings:
¤ Touch the ’ icon next to the time to set the time.
L
Welcome
Time
00:00
M
Date
01.07.2011 M
Display Language
Deutsch M
Country
Germany M
Area (Dial Code)
(Not configured) M
õ
è
Skip Settings Save Setting
õ
To Next Page
Loading...
