4 el en
Gigaset SL910 KURZ-BA System / GRC eng / A31008-M2300-T101-1-8U43 / starting.fm / 4/17/12
Version 4.1, 21.11.2007
Getting started
Connecting the base with the phone network and the mains
power supply
¤ Insert the phone cable (cable slightly flattened) into the lower connection socket at the
rear of the base.
¤ Insert the power cable for the power adapter into the upper connection socket at the
rear of the base.
¤ Insert both cables into the appropriate cable channels .
¤ Connect the power adapter and finally the telephone jack .
Please note:
u The power adapter must always be connected, as the phone will not operate without a
power supply.
u Only use the power adapter and phone cord supplied. Pin connections on telephone cables
can vary.
Wall mounting the base (optional)
3
2
1
3
4
5
1
2
3
4 5
To Next Page
Loading...
