36
Making calls
Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / telefony.fm / 08.12.2011
Version 4.1, 21.11.2007
Making calls
Making an external call
¤ Open the dial page, enter the number, briefly press c.
Or:
¤ Press and hold the c key in idle mode, then enter the number.
You can cancel dialling by pressing a.
Continuing a call on a headset
Bluetooth headset:
Prerequisite: Bluetooth is activated; the connection between the Bluetooth head-
set and the handset exists (
¢ page 60).
¤ Press the talk key on the headset.
It may take up to 5 seconds to establish a connection to the handset.
Use [ R Volume] to adjust Headset Volume/Microphone Sensitivity.
For further details about your headset, see the accompanying user guide.
Wire-bound headsets:
Prerequisite: The headset is connected to the handset (¢ page 7).
¤ Press the push-to-talk key on the headset.
For more information, see the headset's user guide.
Accepting a call
You have the following options:
¤ Press c.
¤ Take the handset out of the charger, if Auto Answer is activated (¢ page 76).
¤ Gigaset SL910A: Touch [ Divert] to divert the call to the answering
machine (
¢ page 56).
Accepting a call on a Bluetooth headset
Prerequisite: Bluetooth is activated; the connection between the Bluetooth head-
set and the handset exists (
¢ page 60).
Only press the talk key on the headset once the headset rings.
For further details about your headset, see the accompanying user guide.
Please note
If a wire-bound headset and a Bluetooth headset are connected at the same
time, you are unable to use the wire-bound headset.
To Next Page
Loading...
