67
Setting the alarm
Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / applications.fm / 08.12.2011
Version 4.1, 21.11.2007
Setting the alarm
Prerequisite: The date and time have already been set (¢page 17).
You can activate/deactivate and set the alarm using the status page (¢ page 24)
or as follows:
¤ In the Applications menu (¢ page 25), touch [ Ü Alarm].
¤ Activate/deactivate the alarm with the button at the top of the display.
¤ Touch [ N Edit] to change the settings for the alarm.
¤ Set the hour and minute for the wake-up time (time setting ¢ page 17).
¤ In the following line, select the weekdays when the alarm should sound.
¤ Touch the ’ next to Ringtone. ¤ Select a ringtone for the alarm call. ¤ Back
with ‘.
¤ Touch [ è Save] and confirm the security prompt.
An alarm call is signalled in the display and with the selected ringtone for a maxi-
mum of 180 seconds. During a call, the wake-up call is only signalled by a short
tone.
Deactivating the wake-up call/repeating after a pause
(snooze mode)
Prerequisite: A wake-up call is sounding.
¤ Deactivate: Touch Off.
¤ Snooze mode: Touch Snooze. The wake-up call is deactivated and then
repeated after 5 minutes. After the second repetition the wake-up call is deacti-
vated completely.
Screensaver, caller pictures and sound pool
The sounds/ringtones, caller pictures or pictures for the screensaver are managed
in the pools. Pictures and mono/polyphonic sounds are saved in your handset by
default. You can load additional pictures and sounds onto the handset from your PC
(
¢ page 87).
Viewing/deleting pictures
¤ In the Applications menu (¢ page 25), touch [ Õ Screensavers] / [ [ Caller
Pictures].
¤ Drag your finger from right to left or left to right over the display to view the indi-
vidual pictures.
¤ Delete picture: Scroll to the picture. ¤ Touch [ Delete]. ¤ Press Ye s to con-
firm.
Playing back sounds
¤ In the Applications menu (¢ page 25), touch [ î Sounds]. ¤ Select a sound.
To Next Page
Loading...
