70
Using multiple handsets
Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / Register-HS.fm / 08.12.2011
Version 4.1, 21.11.2007
Changing the base
If your handset is registered to more than one base, you can set it to a particular
base or to the base that has the best reception (Best Base).
¤ In the Settings menu (¢ page 25), touch [ É Handsets and Base].
¤ Touch Connected to Base ’. ¤ Select the desired base or Best Base (Ø =set).
Changing the name of a handset
The names "INT 1", " INT 2" etc. are assigned automatically on registration.
¤ In the Settings menu (¢ page 25), touch [ É Handsets and Base].
¤ Change name of handset you are using: Touch Rename.
Change name of another handset: Touch ’ next to Registered Handsets.
¤ Select the handset.
¤ Delete the old name with $ and enter the new name (max. 10 alphanumerical
characters).
¤ Confirm with è.
Making internal calls
Internal calls to other handsets registered to the same base are free of charge.
¤ Open the dial page (¢ page 23). ¤ Touch [ ‡ Internal]. ¤ If necessary, select
the handset from the list or touch All Handsets.
After opening the list, press c to initiate a group call to all handsets.
Internal consultation/internal transfer
Prerequisite: You are conducting an external call. At least one other handset is reg-
istered to the base.
¤ Touch [ P Consultation] and then Internal.
¤ If more than two handsets are registered to the base, select one handset or All.
Transferring (connecting) an external call to the other handset
You can transfer the external call either before the internal participant answers or
afterwards.
¤ Transfer external call: Press a.
If the internal participant does not answer or is busy, a recall from the external
participant occurs automatically (after approx. 30 seconds).
¤ Back to external call: Touch [ P End Consultation].
Please note
If there are already two internal connections between the handsets/to the
answering machine (Gigaset SL910A), then an internal consultation call is not
possible.
To Next Page
Loading...
