Childproof lock en
15
End time
If you change the end time, please remember that
easily spoiled foods must not be allowed to remain in
the cooking compartment for too long.
Prerequisite: The selected operation has not already
begun. A cooking time has been set. The time-setting
options menu 0 is open.
Example in the picture: You put the dish in the cooking
compartment at 9:30. It takes 45 minutes to cook and
will be ready at 10:15, but you would like it to be ready
at 12:45 instead.
1. Touch the ¿ arrow to continue to "y end".
2. Set the end time using the rotary selector.
3. Confirm with the Start/Stop button.
The oven is in standby. The y symbol and the time at
which the operation will be finished appear in the status
bar. The operation starts at the appropriate time. You
can see the cooking time counting down in the status
bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. You can
cancel the audible signal early using the 0 button.
Correcting the end time
This is possible if the oven is in standby.
1. Press the Start/Stop button.
2. Press the 0 button.
The Time-setting Options menu opens.
3. Use the ¿ arrow to switch to "y End" and correct
the end time using the rotary selector.
4. Press the 0 button.
5. Press the Start/Stop button.
The oven is on standby.
Cancelling the end time
This is possible if the oven is in standby.
1. Press the Start/Stop button.
2. Press the 0 button.
The Time-setting Options menu opens.
3. Use the ¿ arrow to switch to "y End" and turn the
end time back using the rotary selector.
4. Press the 0 button.
5. Press the Start/Stop button to start.
The cooking time starts to count down immediately.
AChildproof lock
Ch i l d p r o o f lock
Your appliance is equipped with a childproof lock so
that children cannot switch it on accidentally or change
any settings.
Activating and deactivating
You can activate and deactivate the childproof lock
when the appliance is switched on or off.
In each case, press the / button for approx. 4
seconds. A confirmation note appears in the display
and the / symbol appears in the status bar.
The appliance door is locked
In the basic settings, you can change the settings so
that the appliance door is also locked in addition to the
control panel.
The appliance door locks if the temperature in the
cooking compartment reaches approx. 50 °C. The H
symbol is displayed in the status bar. When the oven is
switched off, the appliance door locks immediately if the
childproof lock has been activated.
QBasic settings
Ba s i c set t i ngs
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
Changing settings
1. Press the "On/off" button.
2. Press the menu button.
The operating modes menu opens.
3. Use the rotary selector to select "Settings".
4. Touch the arrow ¿.
5. Use the rotary selector to change the values.
6. Use the arrow ¿ to change to the next settings, and
change them if necessary.
7. Press the menu button to save.
"Save" or "Discard" appears on the display.
List of settings
This list tells you all the basic settings and how to
change them. Depending on the model of the appliance
you own, the display will show only those settings that
apply to your appliance.
You can change the following settings:
ꑗ
(QG
&
ꑗ
'KRWDLU
Setting Options
Select language Additional languages possible
Time of day Sets the current time
Date Sets the current date
To Next Page
Loading...
